Manual

3
4 Your CSC-550 Video to SXGA / HD Scaler
Figure 1, Table 1 and Table 2 define the CSC-550 Video to SXGA / HD
Scaler:
Figure 1: CSC-550 Video to SXGA / HD Scaler – Front and Rear View
Table 1: CSC-550 Video to SXGA / HD Scaler Front Panel Features
# Feature Function
1 POWER Switch Switch for turning the unit ON or OFF
2 RGB/RESET Button Illuminates when the output resolution is set to RGB. Press to set output
to Y Pb Pr (the button no longer illuminates). Press and hold for more
than 3 seconds to reset to VGA. Press and hold for 10 seconds to reset
to 480p
3 IR Receiver Lights when receiving signals from the remote control transmitter
4 MENU Button Displays the OSD menu (see section 6.2)
5 ENTER Button Press to accept changes and change the SETUP parameters (see
section 6.2.3)
6 + Button Press to go up the menu list or adjust the PICTURE submenu values
(see section 6.2.2)
7
CONTROL
- Button Press to go down the menu list or adjust the PICTURE submenu values
(see section 6.2.2)
8 CV Button Press to select the composite video source
9 YC Button Press to select the s-Video (YC) video source
10 COMP. Button Press to select the component video source
11
INPUT
SELECTOR
SXGA Button Press to select the SXGA source