Manual

2
The CSC-550 Video to SXGA / HD Scaler also features:
 Automatic detection of NTSC, PAL-B, PAL-G, PAL-I, PAL-D, and
SECAM video standards
 An On-Screen Display (OSD) for easy setup and adjustment, accessible
via the IR remote control and via the front-panel buttons
 A high-performance adaptive 3D comb filter (for precise color
management)
 Per-pixel motion compensated de-interlacing for artifact-free video images
 Automatic detection for 3:2 pulldown for 24fps film source material
 Frame rate conversion of 50Hz to 60Hz for PAL input signals
 A Vertical Temporal (VT) Filter for removing jagged artifacts
 Advanced color/luminance transient improvement circuitry
 A PC Input connector for easy integration into an existing system
 A built-in procamp for convenient signal adjustment
 A non-volatile memory that retains the last settings used
The machine is fed from an external 12V DC source, making it suitable for
field operation.
Control your CSC-550:
 Directly, via the front panel push buttons
 Remotely, from the infra-red remote control transmitter
To achieve the best performance:
 Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise-levels
(often associated with low quality cables)
 Avoid interference from neighboring electrical appliances and position
your CSC-550 away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the input power wall adapter that is
provided with this unit.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.