User guide

ManualsBrandsComprehensive ManualsReceivers and AmplifiersCDA-VGA102A

VGA SPLITTER 1× 2 with audio

１

USER MANUAL

Table of Contents

1.0 Introduction……………………………………………………..2

2.0 Specifications…………………………………….………..……2

3.0 Package Contents………………………………………… .…..3

4.0 Panel Descriptions…………………………………….…….…3

5.0 Connection and Operation..................................................3

CDA-VGA102A

Cable and Connectivity Company

Summary of content (4 pages)

PAGE 1
VGA SPLITTER 1× 2 with audio CDA-VGA102A USER MANUAL Table of Contents 1.0 Introduction……………………………………………………..2 2.0 Specifications…………………………………….………..……2 3.0 Package Contents………………………………………… .…..3 4.0 Panel Descriptions…………………………………….…….…3 5.0 Connection and Operation..................................................
PAGE 2
VGA SPLITTER 1× 2 with audio VGA SPLITTER 1× 2 with audio Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusti ng this product. Please keep this manual for future reference. 1.0 INTRODUCTION This product is an VGA splitter 1x2 with audio. It distributes the input of the VGA signal and stereo audio signal into the two identical outputs simultaneously.
PAGE 3
VGA SPLITTER 1×2 with audio Operating Temperature Operating Humidity Storage Temperature Storage Humidity Power Requirement External Power Supply Power consumption (Max) Regulatory Approvals Converter Unit Power Supply Accessories Adapter AC Power Adapter User Manual 0℃ to +70℃ 10% to 85 % RH (no condensation) -10℃ to +80℃ 5% to 90 % RH (no condensation) 5V DC@2A 5W(max) FCC,CE,UL UL,CE,FCC US standard, UK standard and so on Note: Specifications are subject to change without notice. 3.
PAGE 4
VGA SPLITTER 1× 2 with audio 5.0 CONNECTION AND OPERATION 1) Connect the supplied VGA cable(M-F) from VGA device into VGA input of the main unit. 2) Connect stereo audio cable(M-M) from audio device into the audio input of the main unit. 3) Connect the VGA cable(M-M) from your displays into the VGA output of the main unit 4) Connect stereo audio cable(M-M) from audio receiver into the audio output of the main unit.