Owners manual

1. INTRODUCTION
The 3G-SDI 1 by 4 Splitter allows SD-SDI, HD-SDI and 3G-SDI signals to
be split from a single SDI source to up four simultaneous SDI outputs
while ensuring high bit rates of 2.970 Gbit/s to give you high bandwidth
signal transmission without signal loss over long distances.
2. APPLICATIONS
• Video broadcasting display
• Professional video program display
• Film studios program monitoring
• Video program switching display
3. PACKAGE CONTENTS
• 3G-SDI 1 by 4 Splitter
• 5 V/2.6 A DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
SDI source input (such as broadcast video cameras or recording
device) and SDI output displays (such as TVs or monitors)
5. FEATURES
• Split one 3G-SDI input source to four 3G-SDI displays simultaneously
• Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s
and 270Mb/s
• Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE
292M, SMPTE 259M-C
• Provides equalized and re-clocked transmission
• Supports signal input and output distances of up to 300 m for SD
signals, 200 m for HD signals and 100 m for 3G signals.
Note: Tested with Belden 1694A Cable. Operating distances may vary
if used with cables of different specifications.
1