Manual

2. HD-SDI (SMPTE 292M, at bitrates of 1.485 Gbit/s and
1.485/1.001 Gbit/s)
3. 3G-SDI (SMPTE 424M/425M-AB, at bitrates of 2.970 Gbit/s and
2.970/1.001 Gbit/s)
• Supports SDI input distance up to 100 meters (3G-SDI), 200 meters
(HD-SDI), or 300 meters (SD-SDI)
Note: Tested with Belden 1694A Cable. Operating distances may vary
if used with cables of different specifications.
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
DC 5V:
Plug the 5V DC power supply into the unit and connect
the adaptor to AC wall outlet.
POWER LED: This blue LED will illuminate when the device is
connected to a power supply.
LOCK LED:
This yellow LED will illuminate when both input SDI
source and output HDMI display has sent and received the signal.
SDI IN:
Connect the SDI source equipment.
2
DC 5V
SDI IN
POWER
LOCK
1 2 3
4
1
2
3
4