Model O VTR 1 3- Way Full-Range Bookshelf Speakers Owner's OVTR 1 Part #331252 Manual - USA 120 Vac Only
IMVO I) l_d _-, a--""_ SAFET¢INSTRUCTIONS -/dl the safetyand operating imm_ous NqTI_HA IT=AD Uq _P.E should be read before the p_roduct is operated. 2) Retain hstructlom - The safety and operatingin.m'uctionsshould be retained for fiamrereference. 5) Heed Warnings - All warningson the productand in the operating instructions sha,_l beadheredto. • _'/ l ,/h_ITE;_IA DISCHARGE UNIT • (/dEC SECTION 810-21) EmCTmC _ I _-_ s_ce. -'--.
The_ flash w_ arrowhead _,,_, within an equilateral triangle, is intended to alert the user to the presenc._ of =ninsulated"dangerous voltage"within the RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: product's enclosure that may be of sufficisnt magnitude to constitute a risk of electric shock topersons.
INfRODUCTION 3-WAY BOOKSHELF SPEAKERS WITH INTEGRATEDPOWERED SUBWOOFERS... ABOUTTHIS MANUAL... The Infinity Compositions Overture OVTR 1 speaker system is a supercompact, 3-way, full-range bookshelf or stand-mounted speaker with an integral powered subwoofer. The OVTR 1 is ideal for use where space is at a premltun.Withits-widebandwidthand uniform response, it excels in the accurate reproduction of music, but its high efficiency and ability.
PLANNING YOURSYSTEM STEREOPLACEMENT... Before decicling where to place your Compositions Overture OVTR 1 speakers, survey your room and keep the following points in mind: The OVTR 1 includes a side-firing woofer that requires a mlnlmllm 2" clearance from an object, shelf, or wall, whether placed vertically[ or horizontally, on a bookshelf or stand (see Figure 1). NOTE: The stand must be large enough to fully support the speaker.
PLANNING YOURSYSTEM HOME THEATER PLACEMENT... (CONT'D) Compositions Overture OVTR 1 speakers are also suitable for use in reproducing home theater sound, as shown in Figure 3: • For front left and right channels, place one OVTR 1 speaker on the left and another on the right, on bookshelves or stands, along either. side of the television monitor. For surround left and right channels, place one OVTR 1 speaker on the left and another on the right, on bookshelves or stands, behind the listening area.
INSTAI22NG FEET AND GRmLES Compositions Overture 0VTR 1 speakers include two types of feet for vertical or horizontal placement on a shelf, table, or speaker stand. VERTICALPLACEMENT... To insure proper woofer firing, temporarily position the speakers so that the woofer grilles face each other. On each molded foot, peel the backiv, g from the self-adhesive tape and press each foot into its respective slot, as shown in Figure 4. Insert a grille into each speaker, so the logo is nearest the foot.
WIniNG TURN OFF ALL POWER... IMPORTANT! SYSTEM After placing the speakers, you are ready to connect your system. First turn off all audio system power. Use high-quality speaker wire to make your connections. For speaker connections, use #18 gauge speaker wire (or #16 for runs over 25 feet) with polarity coding. The side of the wire with a ridge or other coding is usually considered negative polarity " (i.e., - ).
OPERATING THE SYSTEM Each Compositions Overture OVTR 1 speaker system contains a built-in powered subwoofer. For your convenience, the system is not fitted with a power on/off switch. Instead, an auto-sense circuit will instantly switch the system on when anaudio signal is present, and will automatically revert to standby (drawing only 7 watts) when audio is absent for a min'imum of 10 minutes.
OPERATING THE SYSTEM (CONT'D) Listen to a variety of music selections and note the bass level. If you feel there is too much bass, you can reduce it by adjusting the BASS control from the _normal _ center-detent position towards the MIN setting (see Figure 8 on previous page). Conversely, if you want more bass output, rotate the level control towards the MAX setting. " So JUDGING-BASS LEVEL...
CARE OF YOUR SPEAKER SYSTEM The dark grey metallic finish does not require any routine maintenance. When needed, use a soi_ cloth, dampened with water only, to remove any fingerprints or to wipe off dust. Clean the grille by gentle vacuuming or with a damp cloth. NOTE: Do not use any cleaning products For maximum structure that or poIishes on the cabinet or griUe. acoustic transparency, the grille uses a lightweight needs to be handled with care for removal.
SPECIFICATIONS PERFORMANCEDATA DRIVE UNITS AMPLIFIER (BUILT-IN POWER AMPLIFIERFOR LOW-Fi_QUENCY SECTION) DIMENSIONS (also see inside front cover) 1 - OVTR Frequency Range: 35 ~ 20,000 Hz Sensitivity: 92 dB spl @ 1 m/2.83 V (anechoic conditions) Impedance: 8 _ nominal.
LIMITED FIVE-YEAR WARRANTY Who is protected by the warranty? Your Infinity warranty protects the original retail purchaser and all subsequent owners for a period of five (5) years (parts and labor) for all speaker components, and one (1) year (parts and labor) for all electronics, from any failure as a result of an original manufacturing defect so long as: (1) your Infinity loudspeakers were purchased within the fifty states of the U.S.A. or by military, pe.
