User`s guide

iv
Compool/EasyTouch Pool and Spa Control System Upgrade Installation and User’s Guide
IMPORTANT WARNINGS AND SAFETY PRECAUTIONS
Water temperature in excess of 100° F (37.7° C) may be hazardous to your health. Prolonged immersion
in hot water may induce hyperthermia. Hyperthermia occurs when the internal temperature of the body
reaches a level several degrees above normal body temperature of 98.6° F. (37° C.). Effects of
hyperthermia include: (1) Unawareness of impending danger. (2) Failure to perceive heat. (3) Failure to
recognize the need to leave the spa. (4) Physical inability to exit the spa. (5) Fetal damage in pregnant
women. (6) Unconsciousness resulting in danger of drowning. The use of alcohol, drugs, or medication
can greatly increase the risk of fatal hyperthermia in hot tubs and spas.
To reduce the risk of injury, do not permit children to use or operate this sand filter.
When setting up pool water turnovers or flow rates the operator must consider local codes governing
turnover as well as disinfectant feed ratios.
DO NOT increase pump size; this will increase the flow rate through the system and may exceed the
maximum flow rate stated on the drain cover.
SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS PRODUCTIS NOT INSTALLED AND
USED CORRECTLY.
INSTALLERS, POOL OPERATORS AND POOL OWNERS MUST READ THESE WARNINGS AND
ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
Before installing this product, read and follow all warning notices and instructions in this Guide.
Failure to follow warnings and instructions can result in severe injury, death, or property damage. Call
[phone] for additional free copies of these instructions. Please refer to www.pentair.com for
more information related to this product.
Most states and local codes regulate the construction, installation, and operation of public pools and
spas, and the construction of residential pools and spas. It is important to comply with these codes,
many of which directly regulate the installation and use of this product. Consult your local building and
health codes for more information.
This control system is intended for use in swimming pool applications.
IMPORTANT NOTICE - Attention Installer: This Installation and User’s Guide (“Guide”) contains important
information about the installation, operation and safe use of this product. This Guide should be given to the
owner and/or operator of this equipment.
Water temperature in excess of 100 degrees Fahrenheit may be hazardous to your health. Prolonged
immersion in hot water may induce hyperthermia. Hyperthermia occurs when the internal temperature
of the body reaches a level several degrees above normal body temperature of 98.6° F (37° C). The
symptoms of hyperthermia include drowsiness, lethargy, dizziness, fainting, and an increase in the
internal temperature of the body. The effects of hyperthermia include: 1) Unawareness of impending
danger. 2) Failure to perceive heat. 3) Failure to recognize the need to leave the spa. 4) Physical
inability to exit the spa. 5) Fetal damage in pregnant women. 6) Unconsciousness resulting in danger
of drowning.
To reduce the risk of injury, do not permit children to use this product unless they are closely
supervised at all times.
The use of alcohol, drugs, or medication can greatly increase the risk of fatal hyperthermia in
hot tubs and spas.
Control System is intended to control heaters with built-in high limit circuits ONLY. Failure to do so
may cause property damage or personal injury.
Do not use this product to control an automatic pool cover. Swimmers may become entrapped
underneath the cover.