User`s guide

36
Compool/EasyTouch Pool and Spa Control System Upgrade Installation and User’s Guide
Settings Menu: ThermalFlo
®
Heat Pump
ThermalFlo screen
From the ThermalFlo
®
heat pump screen you can view the current ThermalFlo operation status, and set the unit
to operate with for heating only, cooling only, or both heating and cooling if the unit is reversible. Connection
from ThermalFlo is via the COM PORT on the EasyTouch motherboard. See page 63 for ThermalFlo to
EasyTouch COM port wiring information. The ThermalFlo must be set to default ADDRESS 1. One
ThermalFlo unit can be connected to EasyTouch.
Note: Once the ThermalFlo is enabled, use the Left and Right arrow buttons to adjust the ThermalFlo
temperature and cooling, (see page 3).
ThermalFlo
To access ThermalFlo settings menu:
Right button: Access the “Settings” menu.
Up/Down buttons: Select Yes or No to enable or disable ThermalFlo.
Right button: Select the “Heating” setting.
Up/Down buttons: Select Yes or No to use for heating.
Right button: Select the “Cooling” setting.
Up/Down buttons: Select Yes or No to use for cooling only or if the unit is
reversible select both heating and cooling.
Press the Menu button to save the settings and to return to the ThermalFlo Settings
and Status menu options.
Press the Menu button three times to return to the main screen.
To access ThermalFlo Status menu:
MENU ▼ SETTINGS ▼ THERMALFLO STATUS
Getting There
▲
Right button: Access the “Status” menu.
Press the Menu button to return to the main screen.
MENU ▼ SETTINGS ▼ THERMALFLO SETTINGS
Getting There
▲
Status
[ OP NORMAL ]
<MENU> = EXIT


Settings
Status



ThermalFlo
Enable : Yes
Heating : Yes
Cooling : Yes


Settings
Status


