User`s guide

7
Compool/EasyTouch Pool and Spa Control System Upgrade Installation and User’s Guide
EasyTouch Indoor and Wireless Control Panel (Optional)
The EasyTouch Wireless or the Indoor Control Panel allows you to control your pool and spa daily operations
from around your pool area or inside your home. Use the “P” (Pool) and “Spa” (Pool) buttons to heat and
filter your pool and spa. The Indoor Control Panel connects to the EasyTouch motherboard in the load center.
For more information refer to the EasyTouch Indoor Control Panel User’s Guide (P/N 520616) and the
EasyTouch Wireless Control Panel User’s Guide (P/N 520688).
EasyTouch wireless control panel - (P/N 520547)
For details about the
control panel LCD status
messages, see page 8
AUTO HEATER
SPA 100°F / 95°F
AIR 70°F
MON 09:30 AM
Seven user defined
auxiliary circuits.
Buttons switch the
assigned circuit function
on/off (12 hour time-out).
Down arrow button can
also be used for an
“extra” auxiliary circuit if
solar equipment is not
being used
Spa (Hi-Temp) Button: Switches the filter
pump on, rotates valve actuator (to isolate spa
water from pool water), and switches the
heater on. Hi-Temp (EasyTouch single body
system) sets the high temperature settings for
the spa.
Circuit LED
Circuit name label
Spa (Hi-Temp) Button:
Switches the filter pump
on, rotates valve
actuator (to isolate spa
water from pool water),
and switches the heater
on. Hi-Temp (EasyTouch
single body system) sets
the high temperature
settings for the
spa.
Pool (Lo-Temp) Button: Switches
the filter pump on, rotates valve
actuator (to isolate pool water from
spa water), and switches heater on.
Lo-Temp (EasyTouch single body
system) sets the low temperature
settings for the pool (see page 37)
Pool (Lo-Temp) Button:
Switches the filter pump on,
rotates valve actuator (to
isolate pool water from spa
water), and switches heater on.
Lo-Temp (EasyTouch single
body system) sets the low
temperature settings for the
pool.
EasyTouch indoor control panel - (P/N 520549)
AUTO HEATER
SPA 95°F / 100°F
AIR 70°F
MON 09:30 AM
POWER ON
Seven user defined
auxiliary circuits.
Buttons switch the
assigned circuit
function on/off
(12 hour time-out)
Down arrow button
can also be used for
an “extra” auxiliary
circuit if solar
equipment is not
being used