User's Manual

ManualsBrandsComponents Specialties ManualsCamera & PhotoWireless Network Camera

USER MANUAL

2. Playback Control

Playback control bar.

Detailed brief description is shown as below list

Key

Description Key

Description

Play

Slow playing 1/2,1/4, 1/8, Fast

playing 1/2/4/8

Pause

Open all the playback channels

Stop

Stop playing all the playback

By frame

Speaker is Open/Close

Record Clip

Digital ZOOM

Snap

Original proportions

Download

Stretch

Slow/Fast playing

Full Screen

Record file clip

After opening playback, click icon to clip the selected file; and click again to stop the

clip function. Then playback clip is successfully done. Record clip file will be saved as *.264

format.

Snapshot function

Move the mouse curse to the channel you want to capture, and click icon to capture

the live images remotely. After capturing the images successfully, a path prompt box will be

popped up. The captured file will be saved as .bmp format.

Summary of content (8 pages)

PAGE 1
USER MANUAL 2. Playback Control Playback control bar.
PAGE 2
USER MANUAL Record file download Click download icon “ ” on the control bar to display all the matched record file according to the search conditions of channels. Select the record file you want to download and click [Start download]. System will download the record file in sequence and save to your local PC. The downloading file will be displayed in percentage form. After downloading finishes, “Complete” will be displayed on the status bar.
PAGE 3
USER MANUAL 7.3.3 Local Setting Record Path: Set the path to save manual recordings on your PC’s local drive. Download Path: Set the path on your PC’s local drive where you want to download recordings from the WIRELESS NVR. Snapshot Path: Set the path to save manual snapshots on your PC’s local drive. Save: Click Save to save the modifications. File Type: Choose your preferred file type for manual recordings. Interval: Determine the maximum length of manual recordings.
PAGE 4
USER MANUAL Chapter 8 Appendix 8.1 Troubleshooting 1. Q: What can I do if the system does not detect the HDD? A: Check if the power supply is properly connected and data cord and power cables are securely connected, and if something wrong with the HDD interface. Or you may check if your HDD is supported by referring to the specifications or descriptions. 2.
PAGE 5
USER MANUAL 12. Q: Why doesn’t dynamic detection work? A: Please check if the motion detection time and motion detection regional setting are correct and if the sensitivity is set too low. 13. Q: Why doesn’t alarm work? A: Please check if the alarm settings, alarm connection and alarm input signals are correct. 14. Q: Why does buzzer keep sounding? A: Please check the alarm settings, check if motion detection function is enabled and if object motion is detected all the time, be sure to set to Always Off.
PAGE 6
USER MANUAL Model Name O2WK1N Design Focal Length 3.6mm Sensor 1920*1080 (1/2.7" Scanning System Progressive Min. Illumination 0Lux (IR LED ON) Max. Aperture Ratio F2.2 Angular Field of View H: 86.99 WiFi WiFi 802.11b/g Microphone Yes Speaker NO SD card Build-in SD card slot Shutter Mode Auto Gain Control Auto White Balance Auto Wide Dynamic Range D-WDR Digital Noise Reduction 3DNR Day & Night TRUE D/N, Auto 2MP) V: 47.08 87 D : 105.
PAGE 7
USER MANUAL Night Distance 40ft (12M) Transmission Distance Max 300M(Empty No interference distance) White LED Distance 23ft(7M) PIR Distance 23ft(7M) Operating Temperature / -30°C ~ +50°C / Less than 90% RH Humidity ※ Startup : -10°C ~ +50°C Ingress Protection IP66 Input Voltage DC12V Power Consumption Max 5.52W Mechanical design Metal 8.
PAGE 8
USER MANUAL FCC Notification: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.