User's Manual

USER MANUAL
38
5.4.1.2 Port Configuration
Web Port
: This is the port that you will use to log in remotely to the WIRELESS NVR (e.g. using
the Web Client). If the default port 80 is already taken by other applications, please change it.
Client Port
: This is the port that the WIRELESS NVR will use to send information. If the default
port 9000 is already taken by other applications, please change it.
RTSP Port:
Default is 554, if the default port 554 is already taken by other applications, please
change it.
UPNP
: If you want to log in remotely to the WIRELESS NVR using Web Client, you need to
complete the port forwarding. Enable this option if your router supports UPnP. You need to enable
UPnP both on the WIRELESS NVR and the router. In this case, you do not need to configure
manual port forwarding on your router. If your router does not support UPnP, make sure the port
forwarding is completed manually
P2P
: Open/Close P2P