Service manual

Ultraview 1030/1050 Monitors — Service Manual

3-20

I/O Bay PCBA

General

The basic I/O bay PCBA connects the rear external connectors to the CPU PCBA via the

interconnect PCBA.There are no active components on this PCBA, rather, all the components are

connectors, ferrite beads, capacitors, and resistors.

With the Capnography option, the I/O bay PCBA is split into two pieces and mounted inside an

extended I/O bay housing that also holds the capnography electronics.

External Connectors

Component Description

Serial port

connector

DB 9-style, female

1- CD

2- TX (should be RX)

3- RX (should be TX)

4- DTR

5- GND

6- DSR

7- RTS

8- CTS

9- N/C

alarm

connector

RJ-11-style, 6 pin

1- ALARM, COMMON

2- N/C

3- ALARM, NORM. OPEN

4- +12 V

5- N/C

6- GND

front view