Service manual

Ultraview 1030/1050 Monitors — Service Manual
2-23
Setup
USER ACCESS Key
The USER ACCESS key provides privileged users access to enable certain functions for normal
use.
The highlighted option is the one that is currently active. Touching another key changes the
selection.
PATIENT TYPE ON enable Adult/Neonate selection in the Monitor Setup menu. PARAMETER
CONFIGURATION ON displays the parameter configuration key in the Monitor Configuration
menu.
For example, the RECORDING DURATION ON/OFF key controls user access to the recording
duration feature. When set to ON, the RECORDING DURATION key appears in the Recorder
Configuration menu. It does not appear when OFF.
The DEFAULT ENG SAVE MODE key sets the default key position (ON or OFF) of the ENERGY
SAVING MODE key in the Monitor Configuration menu. The ENERGY SAVING MODE key is
present only while operating on batteries.
TONE CONFIGURATION Menu Tree
The TONE CONFIGURATION menu enables the operator to configure the monitor’s alarm tone
configuration.
The active option will be highlighted.
Touch the CONFIGURABLE ALARM TONES key to display the following menu.
This menu enables the operator to configure the monitor’s alarm tones to have different repetition
rates than are defined in the ISO standard.
USER ACCESS - Select user access-to functions
PATIENT TYPE
ON OFF
PARAMETER CONFIGURATION
ON OFF
RECORDING DURATION
OFF
DEFAULT ENG SAVE MODE
OFF
ON ON
TONE CONFIGURATION - Restart the monitor after selecting tone configuration
CONFIGURATION
ALARM TONES
ISO STANDARD
ALARM TONES
CONTINUOUS
ALARM TONES
Use the arrow keys to adjust the priority period of the selected alarm
MEDIUM
FACTORY
LOW
15s 30s
DEFAULTS
HIGH
30s