Service manual

Ultraview 1030/1050 Monitors — Service Manual
2-20
PRESELECTED RECORDINGS Key
The PRESELECTED RECORDINGS key enables you to define which beds and parameters will
be automatically recorded when the user touches the PRESELECTED A and PRESELECTED B
keys in the Recorder menu.
To define the PRESELECTED A and B keys:
1 Touch PRESELECTED RECORDINGS to display the keys:
2 Touch the key to be defined (A or B). The following keys appear:
SELECT TYPE enables you to choose which parameters for the selected bed(s) will be
recorded.
SELECT BED enables you to choose which bed(s) will have the selected parameter sent to
the recorder.
Touch SELECT TYPE to display the following menu:
This menu enables you to choose to record either the first few parameters for the bed, all the
parameters on this bed, or only specified parameters.
3 Touch FIRST x BEDSIDE PARAM(S).
4 Use the arrow keys to cycle through the parameter selections: ALL BEDSIDE PARAM(S) or
FIRST n BEDSIDE PARAM(S) (where n is 1, 2, 4, or 8).
5 Touch CONFIGURED PARAMETERS to display a menu of parameter keys that can be
selected (ON or OFF) for recordings.
6 Touch PREVIOUS MENU to return to the SELECT TYPE and SELECT BEDS keys.
7 Touch SELECT BEDS to define which beds will be included in the pre-configured recordings.
The following keys appear:
ALL SUBNETS includes all the beds on all subnets.
THIS SUBNET includes all the beds on this subnet.
PRESELECTED A
PRESELECTED B
Select configuration to change
SELECT
TYPE
SELECT
BED
Select option to change
FIRST x
BEDSIDE PARAM(S)
CONFIGURED
PARAMETERS
Select recording type
(where x = 1, 2, 4, 8, or All)
ALL
SUBNETS
THIS
SUBNET
THIS
MONITOR
Select beds/subnets