Service manual

Ultraview 1030/1050 Monitors — Service Manual
5-12
01030100 Diagnostics Port Test Failed Replace CPU PCBA.
01030200 860 Test Failed Replace CPU PCBA.
01030201 860 SCC Transmit Failed Replace CPU PCBA.
01030202
860 SCC configuration not
recognized
Replace CPU PCBA.
01030300 DRAM Test Failed Replace CPU PCBA.
01030301 DRAM Test can’t allocate memory
Reboot and retest. If problem
persists, replace CPU PCBA.
01030400 GDS RAM Test Failed Replace CPU PCBA.
01030500 FLASH ROM Test Failed Replace CPU PCBA.
01030501
FLASH ROM boot checksum larger
than flash
Reburn boot kernel software
into flash memory and retest.
If failure persists, replace
CPU PCBA.
01030502
FLASH ROM app checksum larger
than flash
Reburn application software
into flash memory and retest.
If failure persists, replace
CPU PCBA.
01030503 FLASH ROM boot checksum error
Reburn boot kernel software
into flash memory and retest.
If failure persists, replace
CPU PCBA.
01030504 FLASH ROM app checksum error
Reburn application software
into flash memory and retest.
If failure persists, replace
CPU PCBA.
01030505
FLASH ROM read/write memory test
error
Replace CPU PCBA.
01030600 Power Subsystem Test Failed Replace CPU PCBA.
01030601 A2D Converter failed to convert Replace CPU PCBA.
01030602 Invalid Power Request Replace CPU PCBA.
01030603 Temperature out of spec Replace CPU PCBA.
Table 1: Diagnostic Failure Messages (continued)
Error Code Diagnostics Failure Message Suggested Action