hardware guide Component Map M.2 NGFF B Key Socket M.2 NGFF B Key Socket with PCIe 3.0 with USB 3.0 PoE Module Software Reset Button Audio / SLIC Interface Hardware Reset Button USB 2.0 Port 1x 2.5Gbps Ethernet Port 2x 1Gbps Ethernet Ports LED Array JTAG 20 Pin Connector 2x 1Gbps Ethernet Ports DC Jack 2.4GHz 2x U.FL Serial Port Connectors Connector Bluetooth Module 2dBi Omni-directional Antenna 5GHz 2x U.
hardware guide Audio/ SLIC Interface Pin Assignment Power Requirements Audio/ SLIC Interface DC Power 1x DC 12V for Main Board Power Consumption 17.
hardware guide NGFF Slot 1 Pin Assignment NGFF Slot 2 Pin Assignment NGFF Slot with USB 3.0 Top Side NGFF Slot with PCIE3.
hardware guide GPIO Pin Mapping GPIO Pin Mapping Pin Signal Pin Signal GPIO_0 AUDIO_MUTE_BUT GPIO_1 QPIC_BUSY_N GPIO_2 MIC_VOL_M GPIO_3 QPIC_WE_N GPIO_4 QPIC_RE_N GPIO_5 QPIC_DAT4 GPIO_6 QPIC_DAT5 GPIO_7 QPIC_DAT6 GPIO_8 QPIC_DAT7 GPIO_9 WPS GPIO_10 QPIC_CLE_N GPIO_11 QPIC_NAND_CE_N GPIO_12 QPIC_DAT1 GPIO_13 QPIC_DAT2 GPIO_14 QPIC_DAT3 GPIO_15 QPIC_DAT0 GPIO_16 MIC_KPD_PWR_N GPIO_17 QPIC_ALE GPIO_18 KYPD_HOME_N GPIO_19 Boot_Config(PULL_DOWN) GPIO_20 Boot_Config(PU
hardware guide FCC Statament This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
