Specifications

Chapter 5 Further Configuration
82
5.2 Configuring WAN Setup
(only available in Gateway and Wireless Routing Client mode)
The WAN setup allows you to set up the access point for broadband Internet connection.
Described below are the common steps you should start with to select or change the
broadband connection type.
Changing WAN Type
Click on WAN Setup from the CONFIGURATION menu.
The setup page of the WAN
type that you have last
implemented will be displayed.
Since the access point operates
in Dynamic IP Address
Allocation mode by default,
initially the Dynamic IP setup
page will appear.
Press the Change button
(which appears on the setup
pages of all the WAN Types),
to reach the Select WAN Type
page.
Select the WAN type you want to switch to.
Click on Save.
The setup page of the WAN type that you have selected will then appear.