Specifications

Chapter 5 Further Configuration
86
Remote Management (continued…)
If you want to disable the
Remote Management feature:
Key in 0 for both the HTTP
Port and the TELNET Port.
Click on Save button.
Press the Reboot button to
restart your computer so that the
changes can take effect.
5.7 Enabling Parallel Broadband (Only available in Gateway mode)
Compex WPE54AG is equipped with Compex’s exclusive Parallel Broadband
technology, which translates into scalable Internet bandwidth as well as Load Balancing
and Fail-Over Redundancy features.
Since there is no restriction to the type of broadband Internet account that a Compex
WPE54AG can connect to, your network may run with one Compex WPE54AG on
Cable Internet, while the rest connect to ADSL.
The diagram below illustrates an application of Parallel Broadband in a network with 3
Compex WPE54AGs, X, Y and Z.
5.7.1 Load balancing
Building your network around multiple Compex WPE54AGs arranged in
cascade and running under Parallel Broadband, creates an aggregate
bandwidth and enables you to balance the Internet traffic generated by your
private network over multiple broadband connections. For instance, Z might
share its load with X and Y so that each Compex WPE54AG serves
approximately the same number of users.