Specifications

Chapter 4 Common Configuration
54
[Refer to the section on How to set up WEP.]
Press the Save button.
Click on Reboot to restart the system, after which your settings will become effective.
The RADIUS authentication server MUST
be in the same subnet as Compex WPE54AG.
4.5.4 How to set up WPA EAP [Available in Access Point mode ONLY]
The guidelines below will help you to set up Compex WPE54AG for
using WPA-EAP. (Please take note that the WPA or WPA1-EAP,
WPA2-EAP and WPA-EAP_AUTO have the same functions).
Security Mode –WPA-EAP, WPA2-EAP, WPA-EAP-AUTO
At the WLAN Security Setup
page:
Select WPA-EAP mode.
Click on Apply button.
The Cipher Type is set to TKIP.
Key in the IP address of the
Primary RADIUS Server in
your WLAN.
You can optionally add in the IP
address of a Secondary
RADIUS Server, if any.