Specifications

Chapter 4 Common Configuration
53
Press the Save button.
Click on Reboot to restart the system, after which your settings will become effective.
A Hexadecimal value can only take in numbers 0-9 and letters A-F and is NOT
case-
sensitive.
For selecting WPA2-PSK and WPA-PSK-AUTO, you can use the above procedure of
selecting WPA-PSK. However, for WPA ( actually is the same as WPA1) , AES is not
mandatory whereas AES is mandatory for WAP2.
4.5.3 How to set up 802.1x/RADIUS [Available in Access Point mode ONLY]
The guidelines below will help you to set up Compex WPE54AG for using
802.1x/RADIUS.
Security Mode –802.1x/RADIUS
At the WLAN Security Setup
page:
Select 802.1x mode.
Click on Apply button.
Key in the IP address of the
Primary RADIUS Server in
your WLAN.
You can optionally add in the IP
address of a Secondary
RADIUS Server, if any.