Specifications

Chapter 4 Common Configuration
52
4.5.2 How to set up WPA-PSK [Available in AP/Gateway mode ONLY]
The guidelines below will help you to set up Compex WPE54AG for using
WPA-PSK. (Please take note that the WPA-PSK, WPA2-PSK and WPA-
PSK-AUTO security modes share the same functions).
Security Mode –WPA-PSK, WPA2-PSK, WPA-PSK-AUTO
At the WLAN Security Setup
page:
Select WPA-PSK mode.
Click on Apply button.
Specify the key entry format by
selecting either:
• Passphrase (Alphanumeric
characters)
• Hexadecimal
Fill in the pre-shared network
key.
If you are using the Passphrase format, your entry can consist of a minimum of 8
alphanumeric characters or a maximum of 63 alphanumeric characters.
Otherwise, when using the Hexadecimal format, your entry MUST
consist of 64
hexadecimal characters.
The Cipher Type is set to TKIP.
Define the GTK update (Group Transient Key update), or the length of time after which
Compex WPE54AG will automatically generate a new master key.