Specifications

Chapter 4 Common Configuration
30
Scan For Site Survey (continued…)
The Site Survey provides a list of the BSS and SSID available, the Chan (channels), Auth
(Authentication), Alg (Algorithm) being used, and the strength of the Signal received.
To configure to a different
SSID:
Select the radio button
corresponding to the SSID you
want to configure to.
Click on the Apply button to
effect the change and return to
the Setup page.
Click on the Refresh button.
4.3.1 Show Link Information (For Wireless Client Mode Only)
This function offers a summary of the link data when Compex WPE54AG is
in the wireless client mode, i.e., either of the Access Point Client, Wireless
Routing Client or the Wireless Ethernet Adapter mode.
Show Link Information
In the Mode Setup page, go to
the Link Information section.
Click on the Show Link Information button. When an access point is connected to a wired
network and a set of wireless stations, it is referred to as a Basic Service Set (BSS).
The Link Information table
illustrates the following data:
State refers to the MAC address
of the BSS.