Specifications

Chapter 2 Hardware Installation

2.1 Setup Requirements

Before starting, please verify that the following is available:

• CAT5/5e networking cable

• At least one computer is installed with a Web browser and a wired or wireless

network interface adapter

• TCP/IP protocol is installed and IP address parameters are properly configured on

all your network’s nodes

2.2 Compex WPE54AG Hardware Installation

In three simple steps, you may power ON and begin configuring Compex WPE54AG.

1. You can choose to connect the external antenna to the SMA connector of Compex

WPE54AG.

2. Use the Ethernet cable to connect your PC to the socket labelled LAN on Compex

WPE54AG.

3. Attach the power adapter to the main electrical supply, and connect the power plug

onto the socket on Compex WPE54AG.

You may turn the device ON.