Install guide

3. Access to Web-based Interface
The powerful uConfig utility has been developed which provides you
hassle-free access to the web-based configuration page. To do so,
simply
1. Insert your Product CD into your CD-ROM drive. Go to the
Utilities section. Click uConfig to run the program.
2. The following screen shot will appear. Select the access point
click on the OpenWeb button to access the authentication
page.
3. The default password is pre-configured as password and is
already provided in the field below. Click on the Log On!
button to access the main page.
After accessing the main page, you can start doing your configuration
4. Basic Configuration
1. To handle automatic IP addressing, go to Management Port
under the CONFIGURATION section.
2. Go to the DHCP Server option and select the Enable radio
button. Click on the Apply button to update the changes.
Now, the access point acts as a DHCP Server that can assign IP
address to your PC/clients.
5. WLAN Basic Setup
1. To configure the access point for your wireless user, go to
WLAN Basic Setup from the CONFIGURATION section.
2. From your Access Point Setup window, key in the ESSID that
you intend to use for your wireless network.
3. You may leave the frequency channel as SmartSelect. This
allows your access point to select the channel automatically.
4. Leave the remaining settings as default and click the Apply
button to update the changes.
6. TCP/IP Configuration for wireless clients
Generally, automatic IP addressing should be configured for your
wireless client PCs or notebooks. You may configure the TCP/IP
settings of two PCs using Microsoft windows XP as follows:
1. From your desktop, right click on My Network Places and
select Properties.
2. Next, right click on your Ethernet Adapter go to Properties.
3. Highlight Internet Protocol (TCP/IP) and click on the
Properties button.