Install guide

Chapter 2 Let’s Get Going - Hardware Setup
8
2: Let’s Get Going-Hardware Setup
Setup Requirements
Before starting, please verify that the following is available:
 CAT5/5e networking cable
 At least one computer is installed with a Web browser and a wired or
wireless network interface adapter
 TCP/IP protocol is installed and IP address parameters are properly
configured on all your network’s nodes
Hardware Installation
The access point can be powered using either the power adapter provided or
a PoE Injector. The installation process for both options is described below.
OPTION One: Using power adapter to supply power to
the unit
S
S
t
t
e
e
p
p
1
1
:
:
Connect the external antenna to the SMA connector of the access point.