User guide

4-3
Advanced Setup
SNMP Configures SNMP settings 4-18
Administration Configures user name and password for management access;
upgrades software from local file, FTP or TFTP server; resets
configuration settings to factory defaults; and resets the access
point
4-22
WDS/STP Settings Configures WDS bridging and Spanning Tree Protocol features 4-27
Syslog Set-up Controls logging of error messages; sets the system clock via SNTP
server or manual configuration
4-33
Status Displays information about the access point and wireless clients 4-59
AP Status Displays configuration settings for the basic system and the
wireless interface
4-59
Station Status Shows the wireless clients currently associated with the access
point
4-60
Event Logs Shows log messages stored in memory 4-61
802.11a Interface Configures the IEEE 802.11a interface 4-35
Radio Settings Configures common radio signal parameters and other settings
for each VAP interface
4-36
Security Enables each virtual access point (VAP) interface, sets the Service
Set Identifier (SSID), and configures wireless security
4-49
802.11b/g Interface Configures the IEEE 802.11g interface 4-35
Radio Settings Configures common radio signal parameters and other settings
for each VAP interface
4-42
Security Enables each VAP interface, sets the SSID, and configures wireless
security
4-49
Menu Description Page