User guide

5-79
Using the Command Line Interface
Related Commands
address filter entry (5-77)
radius-server address (5-65)
802.1x-supplicant user (5-74)
mac-authentication session-timeout
This command sets the interval at which associated clients will be
re-authenticated with the RADIUS server authentication database. Use the no
form to disable reauthentication.
Syntax
mac-authentication session-timeout <minutes>
minutes - Re-authentication interval. (Range: 0-1440)
Default
0 (disabled)
Command Mode
Global Configuration
Example
Filtering Commands
The commands described in this section are used to filter communications
between wireless clients, control access to the management interface from
wireless clients, and filter traffic using specific Ethernet protocol types.
Table 22 Filtering Commands
Enterprise AP(config)#mac-authentication session-timeout 1
Enterprise AP(config)#
Command Function Mode Page
filter local-bridge Disables communication between wireless clients GC 5-80
filter ap-manage Prevents wireless clients from accessing the
management interface
GC 5-81
filter uplink enable Ethernet port MAC address filtering GC 5-81
filter uplink Adds or deletes a MAC address from the filtering table GC 5-81
filter ethernet-type enable Checks the Ethernet type for all incoming and outgoing
Ethernet packets against the protocol filtering table
GC 5-82