User guide

5-60
CHAPTER 5: COMMAND LINE INTERFACE
Flash/File Commands
These commands are used to manage the system code or configuration files.
Table 18 Flash/File Commands
bootfile
This command specifies the image used to start up the system.
Syntax
bootfile <filename>
filename - Name of the image file.
Default Setting
None
Command Mode
Exec
Command Usage
• The file name should not contain slashes (\ or /), the leading letter of the
file name should not be a period (.), and the maximum length for file
names is 32 characters. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
• If the file contains an error, it cannot be set as the default file.
Example
Command Function Mode Page
bootfile Specifies the file or image used to start up the system GC 5-60
copy Copies a code image or configuration between flash
memory and a FTP/TFTP server
Exec 5-61
delete Deletes a file or code image Exec 5-62
dir Displays a list of files in flash memory Exec 5-63
show bootfile Displays the name of the current operation code file
that
booted the system
Exec 5-64
Enterprise AP#bootfile -img.bin
Enterprise AP#