Specifications

Chapter 6 Compex WLU108G Utility Configuration
38
5. Next, proceed to Advanced tab. Set your Network Type to AdHoc
and 802.11b Preamble to
Short &Long .
6. You may leave the Transmit Power Level at their default values.
7. In the Wireless Mode section, check and confirm whether all options
are ticked.
8. Next, proceed to Wireless Mode when starting Ad-hoc Network
section. The channels available depend on the regulatory domain.
If no other wireless adapters are found matching the ad hoc mode,
this selection specifies the channel with which the adapter starts a
new ad hoc network with. Please note that the wireless adapter
must match the wireless mode and channel of the other wireless
clients it associates to.
9. Set the Channel to
Auto to let Compex WLU108G automatically
detect the channel to use.
However, if you wish to set a specific channel, you mush ensure all
clients are in the same channel in order to communicate to one
another.