Security Policy Management Security Policy Management In the Security Policy Management page, select how to manage security settings: ® Central management A remote Security Management Server manages the Security Gateway In Smart Dashboard with a network object and security policy. ® Local management The appliance uses a web application to manage the security policy. After you configure the appliance with the First Time Configuration Wizard, the default security policy is enforced automatically.
Interment Connection internet Connection In the Internet Connection page, configure your Internet connectivity details or select Configure Interment connection later. To configure Internet connection now: 1. Select Configure Internet connection now. 2. From the Connection type drop down list, select the protocol used to connect to the Internet. 3. Enter the fields for the selected connection protocol. The information you must enter is different for each protocol.
Local Network Local Network In the Local Network page, select io enable or disable switch on LAN ports and configure your network settings. By default, they are enabled. You can change the IP address and stay connected as the appliances original IP Is kept as an alleys IP until the first time you boot the appliance. Tell me about the fields... ® Enable switch on LAN pores Aggregates all LAN ports io act as a switch with one IP address for the switch.
Wireless Network Wireless Network For WiFi models only: In the Wireless Network page, configure wireless connectivity details. When you configure a wireless network, you must define a network name (SIDS. The SAID (service sel identifier} is a unique string that identifies 8 ELAN network to clients that try to open a wireless connection with it. ‘We recommend that you protect the wireless network with a password. Otherwise, a wireless diet can connect to the network without authentication.
Administrator Access Administrator Access In the Administrator Access page, configure f administrators can use the appliance from a specified IP address or any IP address. To configure administrator access: 1. Select the sources from where administrators are allowed access: u LAN All internal physical ports, a Trusted wireless A known wireless network. ® VPN Using encrypted traffic through VPN tunnels from a remote she or using a remote access client.
Appliance Registration Appliance Registration The appliance can connect io the Check Point User Center with its credentials to pull the license information and activate the appliance. If you have Internet connectivity configured: Click Activate License. You are notified that you successfully activated the appliance and you are shown the status of your license for each blade. If you are working offline while configuring the appliance: 1.
Appliance Registration You are notified that you successfully activated the appliance and you are shown the status of your license for each blade. To postpone appliance registration and get a 30-day trial license: 1. Click Next. The License activation was not complete notification message is shown. 2. Click OK. The appliance uses a 30-day trial license for all blades. You can register the appliance later from the Weill Device » License page.
Appliance Registration A. In the new window, enter: = First name = Last Name 2 Email. You must enter this a second time to confirm. ® Company This Is the Account Name to which the appliance is paired. 4. Click Next. The Software Blades Activation page pans. 1570R Appliance 80.20.
Security Management Server Authentication Security Management Server Authentication For Centrally managed appliances only: When you select central management as your security policy management method, the Security Management Server Authentication page opens.
Security Management Server Conciliation Security Management Server Connection For Centrally managed appliances only: After you set a one-time password for the Security Management Server and the appliance, you can connect to the Security Management Server to establish trust between the Security Management Server and the appliance. To connect to the Security Management Server, select ® Connect to the Security Management Server now.
