Quick Start Guide

Citrix SD-WAN 110-WiFi-SE Quick Start Guide
9
Ensure that the power supply cords include grounding plugs and are plugged into
grounded electrical outlets.
Ensure that the power source can handle the appliance's maximum power
consumption rating with no danger of an overload.
A reliable ground must be maintained at all times. Therefore, the rack should be
grounded. Pay particular attention to power supply connections other than the
direct connection to the branch circuit (for example, connections to power strips).
Warning: There is a risk of explosion, if the battery is replaced with an incorrect battery
type.
Desktop mount the appliance
The Citrix SD-WAN 110-WiFi-SE appliance can be desktop mounted using the rubber feet
shipped in the appliance package.
Wall mount the appliance
The Citrix SD-WAN 110-WiFi-SE appliance can be wall mounted by placing and adjusting
the appliance screw slots on the wall screws.
Use two wall mount screws with the following dimensions:
Screw Length:12mm
Screw out of wall: 5.5mm
Screw head: 6.0mm ~ 7.5mm
Screw body: 3.5mm
已註解
[PK[1]:
Is this right? Do we provide rubber feet for
desktop mount?