Quick Start Guide

Citrix SD-WAN 110-WiFi-SE Quick Start Guide
6
Figure 2. Citrix SD-WAN 110-WiFi-SE back panel
Note: Port 1/1 is the default LAN port and port 1/2 is the default WAN port. Port 1/3 is
disabled. The default LAN IP is 192.168.0.1. The WAN port is configured as a DHCP
client.
Port Label
Type
Description
1/1, 1/2 and 1/3 Traffic Network traffic
1/4 Management port Use standard mgmt. port description
USB 2 USB ports USB ports
Serial RS-232 serial An RS232 serial console port.
Power Power button
Power OFF state:
o Press power button and release it
immediately: Power on the appliance.
o Press power button and hold it for 10+
seconds: Factory reset the appliance.
Power ON state:
o Press power button and release it
immediately: Orderly shutdown the
appliance.
o Press power button and hold it for 5+
seconds: Force shutdown the
appliance.
DC 12V DC Power Supply Refer System Specifications for power supply
information.