Getting Started Guide
Table Of Contents
- Introduction
- Shipping Carton Contents
- Setting up the Appliance
- Connecting the Cables
- First Time Deployment Options
- Appliance Diagrams and Specifications
- Using the First Time Configuration Wizard
- Starting the First Time Configuration Wizard
- Welcome
- Authentication Details
- Appliance Date and Time Settings
- Appliance Name
- Security Policy Management
- Internet Connection
- Local Network
- Wireless Network
- Administrator Access
- Appliance Registration
- Security Management Server Authentication
- Security Management Server Connection
- Software Blade Activation
- Summary
- Zero Touch Cloud Service
- USB Drive or SD Card
- Health and Safety Information
- Support
First Time Deployment Options
1590 Appliance R80.20 Getting Started Guide|13
Key Item Description
3 Internet LED n
Off - No internet connection
n
Blue - Connected
n
Blinking Red - Connection failure
4 Power LED (Status) n
Solid Blue – Normal operation
n
Blinking Blue – Boot in progress or installing
firmware.
n
Red – Error/Alert
Note – This LED is red when the appliance is first turned on.
Table: LEDs (continued)
The Management LED shows the status of the retries mechanism:
Action
Management LED
Activity
Zero Touch is running. Blinks pink (slowly)
Successfully connected to Zero Touch Cloud Server and saved the
deployment script.
Blinks pink (rapidly)
Zero Touch process is completed. SMP activation is not needed. Solid pink
Activation sleeping time. Blinks blue (slowly)
Reactivation. Blinks blue (rapidly)
SMP is connected. Solid blue.
SMP mode is off. LED off
Gateway failed to connect to the SMP and will exit from the retry script. Constant red.
Wait times before retry:
Failure Waiting Time
1st 2 minutes
2nd 4 minutes
3rd 8 minutes
4th 16 minutes
Subsequent Retries every 16 minutes until Cloud Services are successfully activated