User manual

46
COMPEX 3 User Manual
These 2 buttons allow you to add or
delete personalised programmes.
Add: Click this to choose from among 2
programming modes:
- Normal mode (default mode). This allows
you to create programmes with 3
sequences: warm-up, work, and recovery. If
the warm-up and recovery sequences are
not required, simply uncheck the
corresponding boxes.
- Continuous mode. This is particularly
indicated for Analgesic programmes.
Check the corresponding box to select this
mode (see point 2).
Checking the Continuous mode box will
give you access to a programming mode
consisting of just one sequence (warm-up
and recovery sequences are disabled).
Use this drop-down menu to select a
programme to edit.
NOTE: Type in the first letter of the
programme you are looking for to facilitate
your search.
Use this option to adjust pulse width.
This option allows you to choose the
following options for the warm-up and
recovery sequences:
- frequency
- duration
You can use this section to define the
following parameters for each of the 2
sequences (contraction/relaxation):
- current ramp-up time
- steady current duration
- current ramp-down time
- frequency
- number of times each contraction/
relaxation sequence is repeated.
This box shows the total duration of
the programme. This is calculated
automatically depending on the options
chosen (warm-up sequence, recovery
sequence, number of repetitions in work
sequence, etc.).
This box can be used to enter relevant
comments.
Save: Click this to save the personalised
programme you have created..
Cancel: Click this to exit without saving
your changes.
NOTE:
m functions are disabled in
personalised programmes;
Global history: This option allows you to
access the global history corresponding to
the patient lists in your Compex 3
software. The list is ordered
chronologically. Click on Global History to
bring up the following screen:
1
2
3
4
5
6
7
8