User manual

43
COMPEX 3 User Manual
Double click on the lines containing the
patients you wish to transfer to your
stimulator. Their names will appear in area
1. To remove a patient from the list simply
uncheck the corresponding box.
OK: Click this to confirm your choices.
Cancel: Click this to exit without saving
your changes.
This window shows the list of
personalised programmes that will be
transferred to the stimulator during the
next synchronisation process. The names
of these programmes will appear on the
stimulator’s screen following
synchronisation.
NOTE: A maximum of 100 personalised
programmes can be added to the
stimulator.
Edit: Click this to edit the list, i.e. add or
remove personalised programmes.
Double click on the lines corresponding to
the programmes you wish to transfer to
your stimulator and view their
corresponding parameters. The
programmes will be stored in the
Personalised programmes category of the
Specific Treatment type of the Compex 3
stimulator.
To remove a programme from the list
simply uncheck the corresponding box.
OK: Click this to confirm your choices.
Cancel: Click this to exit without saving
your changes.
This section of the screen contains a
series of advanced options than can be
used to define your plans. A plan contains
the different data that you wish to transfer
to the stimulator. There are 3 possible
settings.
Normal use: Default mode that allows
users to access all the options available for
the Compex 3 stimulator and software.
The stimulator can work with or without a
patient list. New patients can be created in
the stimulator. Users have unrestricted
access to both normal and personalised
programmes.
Restrictive use: Mode that allows users
access only to the list of treatments for the
patient(s) stored in stimulator’s memory.
New patients cannot be created in the
stimulator. Treatments can no longer be
performed when a preestablished number
is reached.
Without patient list: There is no
patient list in the stimulator. Users can,
however, access personalised programmes.
2
3