User manual

13
COMPEX 3 User Manual
Waste electrical and
electronic equipment (WEEE)
marking according to EN
50419 standard.
The On/Off switch is a multi-
function key (symbol no. 5009
IEC 60878)
Functions
• On/Off (2 positions, stable)
• Waiting or preparation for
part of the unit
• Off (turns system off)
10 - Technical specifications
A) General information
941210 Power: Nickel metal hydride
(NiMH) rechargeable battery (4.8 ≈ V 1200
mA/h).
Battery chargers: Only battery chargers
bearing the following information can be
used to recharge the batteries supplied with
Compex 3 stimulators.
Europe
683010
Type TR1509-06-E-133A03
Input 90-264 VAC /47-64 Hz/0.5 A max.
Output 9 V/1.4 A/15 W
USA
683016
Type TR1509-06-A-133A03
Input 90-264 VAC /47-64 Hz / 0.5 A max.
Output 9 V/1.4 A/15 W
UK
683012
Type TR1509-06-U-133A03
Input 90-264 VAC /47-64 Hz / 0.5 A max.
Output 9 V/1.4 A /15 W
B) Neurostimulation
All electrical specifications are given for an
impedance of 500-1000 Ohm per channel.
Channels: Four independent and individually
adjustable channels that are electrically iso-
lated from each other and earthed.
Impulse shape: Constant rectangular current
with pulse compensation to eliminate any
direct current component to prevent residual
polarization at skin level.
Maximum pulse intensity: 120 mA
Pulse intensity increments: Manual adjust-
ment of stimulation intensity:
0-999 (energy units) – Minimum increment:
0.5 mA
Pulse width: 30 to 400 microseconds
Maximum electrical charge per pulse: 96
microcoulombs (2 x 48 µC, compensated)
Standard pulse ramp-up time:
3 microseconds (20%-80% of maximum
current)
Pulse frequency: 1-150 Hz.
C) Denervated currents
Impulse shape: Compensated, rectangular,
or triangular
Maximum pulse intensity: 30 mA
Minimum intensity increment: 0.25 mA
Pulse width: 10 ms – 1000 ms
Pulse frequency: 1/30 Hz – 10 Hz
D) Direct currents
Iontophoresis and Hyperhidrosis:
Continuous current
Maximum intensity: 20 mA
Minimum intensity increment: 0.125 mA
Oedema:
Rectangular, non-compensated current
Pulse width: 150 µS
Maximum intensity: 120 mA
Minimum intensity increment: 1 mA
Pulse frequency: 100 Hz
E) General technical
specifications
601131 Snap-connector stimulation
cables
Machine connector: 6 poles
Electrode connector: Female snap
connector
Length: 1500 mm