Specifications

Chapter 6 Configuring Your Wide Area Network
48
6.4.2 How to Configure @HOME Cable Service
Many broadband services require a simple DHCP request for connection. Two such
cable services are Optus@Home and
Roger@Home.
To configure @HOME Cable Service,
1. Follow the steps stated in “Configuring for Singapore Cable Vision (SCV) Service”
on the previous section.
2. Next, click on System Config at the Command window under the SYSTEM
TOOLS menu and enter the required entry as shown.
Figure 6.4-2 System Identity
3. Click on “Apply” and then “Save” button to set the System Configuration.
4. Reboot your device.
System Name
You can obtain this information
from your ISP.
System Contact and Location
You may leave it as it is or fill in
your ISP contact and location
information. They are for your
future reference only.