Specifications

Chapter 5 Using Menu Tools
35
1. Enter the values for IP Address, Subnet Mask, DHCP Start and End IP Addresses to
individual fields.
2. You can check on “Always use these DNS servers:” to disable the function of
retrieving DNS IP Address automatically, so that you can enter your preferred DNS
IP Address in the Primary and Secondary DNS IP Address field.
3. Next, you can set DHCP Server to Enable if you wish to use the built-in DHCP
server of Compex SGX3226.
4. Click on “Save” button to save your configuration.
NOTE
If your IP Address of the PC has set to “Obtain an IP address automatically”,
values in the fields will automatically appeared. Refer to “Configuration on PC
settings” on Page 19 for the configuration on the PC.
DHCP Active Leases
This section indicates the information of the PC whereby the IP addresses is
dynamically assigned to it in the same network. The expire time indicates the time
when the system needed to update the IP Address of that particular PC.
Figure 5.1-5 DHCP Active Leases