User`s guide

Chapter 8: Installing the Driver on an Existing Operating System ● 51
Installing on Solaris
To install the driver on Solaris:
1 Start your computer.
2 Insert and mount the driver disk:
volcheck
3 Change to the driver installer directory:
cd /floppy/floppy0/DU/sol_210/i86pc/Tools
4 Start the driver installer:
./install.sh -i
5 Reboot your computer, then remove the driver disk.
6 Continue with Managing Your Storage Space on page 52.
Note:
Currently, Adaptec Storage Manager is not supported on Solaris. To create and manage
arrays, use the Adaptec RAID Controller Utility (ACU). See page 54 for more information.
Installing on FreeBSD
To install the driver on FreeBSD:
1 Start your computer.
2 Insert and mount the driver disk:
mount -t msdos /dev/fd0 /mnt
3 Copy the driver package to the /tmp directory:
cp /mnt/aac-02.00.00-x.tgz /tmp
4 Install the driver package:
pkg_add aac-02.00.00-x.tgz
5 Reboot your computer, then remove the driver disk.
6 Continue with Managing Your Storage Space on page 52.
Note:
Currently, Adaptec Storage Manager is not supported on FreeBSD. To create and
manage arrays, use the Adaptec RAID Controller Utility (ACU). See page 54 for more
information.