User guide

LSI Corporation
- 24 -
12Gb/s MegaRAID SAS RAID Controllers User Guide
October 2013
Chapter 3: MegaRAID SAS RAID Controller Characteristics
12GB/s MegaRAID SAS RAID Controller Family
Figure 9 Card Layout for the MegaRAID SAS 9361-8i RAID Controller
The following table describes the jumpers and the connectors on the MegaRAID SAS 9361-8i RAID controller.
Table 4 Jumpers and Connectors
Jumper/
Connector
Type Description
J1A2
IPMI-style I
2
C connector for Ports 4 to 7
3-pin connector
Supports SCSI Enclosure Services (SES) over I
2
C through an internal I
2
C
backplane cable.
J1A3 Local battery backup unit connector 20-pin connector
Connects an LSIiBBU unit directly to the RAID controller.
J1A4
IPMI-style I
2
C connector for Ports 0 to 3
3-pin connector
Supports SES over I
2
C through an internal I
2
C backplane cable.
3_01679-01
J1A2
J2B4
J4B1
J1A4
J1B1
J5B1
J6B1
J6B5
J6B4
J6B6
J6B3
J6B2
J1A3
J6B7
J5A1
J3L1