Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual Terminal Operation | en 95
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
7.4 Creating a Logical Drive
Browse through the Main Menu and select View and Edit Logical Drive.
Fig. 7.6 View and Edit Logical Drive Page
For the first logical drive on the RAID subsystem, simply choose the first logical drive entry, LG
0, and press [ENTER] to proceed. You may create as many as 16 logical drives or more using
drives in a RAID subsystem or in a cascaded enclosure.
When prompted to “Create Logical Drive?,” select Yes and press [ENTER] to proceed.
7.4.1 Choosing a RAID Level
A pull-down list of supported RAID levels will appear. Choose a RAID level for this logical drive.
7.4.2 Choosing Member Drives
Choose your member drive(s) from the list of available physical drives. Tag the drives for inclu-
sion by positioning the cursor bar on the drive and then pressing [ENTER]. A star sign “*” will
appear on the selected physical drive(s). To deselect the drive, press [ENTER] again on the
selected drive and the “∗” will disappear. Use the same method to select more drives.
Fig. 7.7 Choose Member Drives Page