Specifications

90 en | Terminal Operation SCSI to SATA RAID Subsystem | Administrator’s Manual

F.01U.027.802 | V1 | 2006.11 Bosch Security Systems

7 Terminal Operation

7.1 Power on RAID Enclosure

Hardware installation should be completed before powering on your RAID enclosure. The sub-

system and disk drives must be configured and properly initialized before the host computer

can access the storage capacity. The configuration and administration utility resides in the

controller's firmware.

Open the initial terminal screen: use the arrow keys to move the cursor bar through the menu

items, then press [ENTER] to choose the terminal emulation mode, and [ESC] to return to the

previous menu/screen.

Fig. 7.1 RS-232C Initial Screen

NOTICE!

All figures in this chapter are showing examples using the management hyper terminal screen.