Specifications

88 en | Terminal Screen Messages SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
6.8 Controller Voltage and Temperature
Fig. 6.8 Controller Voltage and Temperature Monitoring Page
Choose from Main Menu “View and Edit Peripheral Devices,” and press [ENTER]. From the
submenu, choose “Controller Peripheral Device Configuration,” “View Peripheral Device Sta-
tus”, then press [ENTER].
Fig. 6.9 Controller Voltage and Temperature Status Screen
The current status of voltage and temperature detected by the controller will be displayed on-
screen and will be stated as normal, out of order, within or within the safety range.
CurSynClk Current bus synchronous clock:
??.?GHz The default setting of the channel bus is ??.? GHz
Async. The default setting of the channel bus is Asynchronous mode.
(empty) The default bus synchronous clock has changed. Reset the con-
troller for the changes to take effect.
CurWid Current Bus Width:
Narrow SCSI transfer protocol
SATA As regulated by SATA specifications