Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual Terminal Screen Messages | en 83
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
6.2 Main Menu
Fig. 6.2 The RC-232C Main Menu
Use the arrow keys to move the cursor bar through the menu items, then press [ENTER] to
choose a menu, or [ESC] to return to the previous menu/screen.
In a subsystem or controller head where battery status can be detected, battery status will be
displayed at the top center. Status will be stated as Good, Bad, several “+ ” (plus) signs (VT-
100 mode), or color blocks (ANSI mode) will be used to indicate battery charge. A battery
fully-charged will be indicated by five plus signs or color blocks.
When initializing or scanning an array, the controller displays progress percentage on the
upper left corner of the configuration screen. An “i” indicates array initialization. An “s” stands
for scanning process. The number(s) next to them indicate the logical drive number (e.g., log-
ical drive 0).
6.3 Quick Installation
Fig. 6.3 Quick Installation Page
Type Q or use the ↑ ↓ keys to select "Quick installation", then press [ENTER]. Choose Yes to
create a logical drive.
All possible RAID levels will be displayed. Use the ↑ ↓ keys to select a RAID level, then press
[ENTER]. The assigned spare drive will be a Local Spare Drive, not a Global Spare Drive.
All available disk drives in the enclosure will be included in one logical drive. The subsystem
will start initialization and automatically map the logical drive to LUN 0 of the first host chan-
nel available.