Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual LCD Keypad Operation | en 79
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
5.14.5 Controller Date and Time
This submenu is only available for controllers or subsystems that come with a real-time clock
on board.
Time Zone
Choose “View and Edit Configuration Parameters,” “Controller Parameters," then press ENT.
Press the up or down arrow keys to scroll down and select “Set Controller Date and Time”,
then press ENT.
The controller uses GMT (Greenwich Mean Time), a 24-hours clock. To change the clock to
your local time zone, enter the hours later than the Greenwich mean time after a plus (+) sign.
For example, enter “+9” for Japanese time zone.
Choose “Time Zone” by pressing ENT.
Use the down key to enter the plus sign and the up key to enter numeric representatives.
Date and Time
Use your arrow keys to scroll down and select “Date and Time” by pressing ENT.
Use the arrow keys to select and enter the numeric representatives in the following order:
month, day, hour, minute, and the year.