Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual LCD Keypad Operation | en 77
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
5.13.8 Adjust LCD Contrast
The controller LCD contrast is set at the factory to a level that should be generally acceptable.
The controller is equipped with an LCD contrast adjustment circuit in case the factory-preset
level needs to be adjusted either via the RS-232 terminal emulation menus or using the LCD
keypad panel.
From the main menu, choose “View and Edit Peripheral Dev.” Press ENT on it, press arrow
keys to scroll down, and select “Adjust LCD Contrast,” press ENT to proceed, and then use
the arrow keys to find an optimal setting. Press ESC to return to the previous menu.