Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual LCD Keypad Operation | en 75
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
Disable Password
To disable or delete the password, press ENT on the first flashing digit for two seconds when
requested to enter a new password. The existing password will be deleted. No password
checking will occur when entering the Main Menu from the initial terminal screen or making
configuration changes.
5.13.3 Reset Controller
To reset the controller without powering off the system, Press the up or down arrow keys to
“Reset Controller,” then press ENT. Press ENT again for two seconds to confirm. The control-
ler will now reset.
5.13.4 Shutdown Controller
Before powering off the controller, unwritten data may still reside in cache memory. Use the
“Shutdown Controller” function to flush the cache content. Press the up or down arrow keys
to “Shutdown Controller,” then press ENT. Press ENT again for two seconds to confirm.
The controller will now flush the cache memory. Press ENT for two seconds to confirm and to
reset or power off the subsystem.
5.13.5 Controller Maintenance
For Controller Maintenance functions, see Section 16 Event Messages.