Specifications

64 en | LCD Keypad Operation SCSI to SATA RAID Subsystem | Administrator’s Manual
F.01U.027.802 | V1 | 2006.11 Bosch Security Systems
5.9.2 Deleting a Partition of a Logical Drive
Press ENT for two seconds to enter the Main Menu. Press the up or down arrow keys to select
"View and Edit Logical Drives..,” then press ENT.
Press the up or down arrow keys to select a logical drive, then press ENT.
Press the up or down arrow keys to choose “Partition Logical Drive," then press ENT.
The first partition’s information will be shown on the LCD. Press the up or down arrow keys to
browse through the existing partitions in the logical drive. Select a partition by pressing ENT
for two seconds.
Use the up or down arrow keys to change the number of the flashing digit to “0," then press
ENT to move to the next digit. After changing all the digits, press ENT for two seconds.
The disk space of the deleted partition will be automatically allocated to the previous partition
as diagrammed below. If partition 1 is deleted, its disk space will be added to partition 0.
Fig. 5.1 Drive Space Allocated to the Previous Partition
WARNING!
Whenever there is a partition change, data will be erased. Prior to partition change, you have
to remove its associated host LUN mappings. After the partition change, you also need to re-
arrange the disk volumes from your host system OS.