Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual LCD Keypad Operation | en 61
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
5.8 Assigning Spare Drive and Rebuild Settings
5.8.1 Adding a Local Spare Drive
Press ENT for two seconds to enter the Main Menu. Press the up or down arrow keys to select
"View and Edit Drives," then press ENT.
Disk drive information will be displayed on the LCD. Press the up or down arrow keys to select
a drive that is stated as “NEW DRV” or “USED DRV” that has not been included in any logical
drive, nor specified as a spare drive or failed drive, then press ENT to select it.
Press the up or down arrow keys to select “Add Local Spare Drive,” then press ENT.
Press the up or down arrow keys to select the logical drive where the Local Spare Drive will be
assigned, then press ENT for two seconds to confirm.
The message “Add Local Spare Drive Successful” will be displayed on the LCD.
5.8.2 Adding a Global Spare Drive
Press ENT for two seconds to enter the Main Menu. Press the up or down arrow keys to select
"View and Edit Drives," then press ENT.
Disk drive information will be displayed on the LCD. Press the up or down arrow keys to select
a disk drive that has not been assigned to any logical drive, then press ENT.
Press the up or down arrow keys to select “Add Global Spare Drive,” then press ENT.
Press ENT again for two seconds to add the spare drive. The message, “Add Global Spare
Drive Successful,” will be displayed on the screen.