Specifications

SCSI to SATA RAID Subsystem | Administrator’s Manual LCD Keypad Operation | en 59
Bosch Security Systems F.01U.027.802 | V1 | 2006.11
5.7 Mapping a Logical Volume/Logical Drive to Host LUN
The process of mapping a logical drive is identical to that of mapping a logical volume. The
process of mapping a logical volume is used as an example.
Press ENT for two seconds to enter the Main Menu. Use the up or down arrow keys to select
The first available ID on the first host channel appears (usually channel 0).
Press the up or down arrow keys to select a configured host ID, and then press ENT for two
seconds to confirm.
Press the up or down arrow keys to select the type of logical configuration to be associated
with a host ID/LUN. Available choices are “Map to Logical Drive” or “Map to Logical Volume”.
Confirm your choice by pressing ENT for two seconds.
Press the up or down arrow keys to select a LUN number, then press ENT to proceed.
Press ENT for two seconds to confirm the selected LUN mapping.
Press the up or down arrow keys to select a logical drive, a logical volume, or a partition of
them. Press ENT for two seconds to map the selected partition to this LUN. If the logical con-
figuration has not been partitioned, you can map the whole capacity to a host LUN.
Press ENT for two seconds when prompted by “Map Host LUN” to proceed.
Mapping information will be displayed on the subsequent screen. Press ENT for two seconds
to confirm the LUN mapping.